Applying Drylok To Basement Walls Over Paint


Applying Drylok To Basement Walls

How to apply drylok to basement walls? Below some tips in applying drylok to basement walls.

Apply the first coat to bare masonry with a three-quarter-inch nap roller, a DRYLOK® Brush or a quality nylon bristle brush. If using a brush, work the DRYLOK® Extreme Masonry Waterproofer into the pores of the masonry, making sure to fill all pores and pinholes.
Drylok is an interior latex paint that serves double duty as a waterproofing agent for previously uncoated concrete, masonry or cinder block basement walls. Properly applied 7. Allow the wall to dry thoroughly before applying the Drylok.
Waterproofing basement walls with DRYLOK paint is easy and will help seal out that musty As a result, I had to prep the walls before applying the DRYLOK®.
Fill all gaps between floor and walls with DRYLOK Fast Plug. Seal floor/wall joints with DRYLOK Fast Plug. Apply the second coat with a brush or masonry roller. Apply the first coat with a stiff bristle brush working thoroughly into the pores of the masonry surface.

DryLok is a useful coating which can be painted onto wet basement walls to Once the first coat is dry, use a roller to apply a second coat of DryLok to the wall.
They waterproofed the concrete walls that would face below-grade soil—and any homeowner, applying DRYLOK differs only slightly from painting a wall.
But it became clear that the basement walls were a… As a result, I had to prep the walls before applying the DRYLOK. Add Tip Ask Question
I searched and read a lot of posts on Drylok, none about application. this weekend on the unfinished poured walls of my 72’x24′ basement.